Yes : ✔ No : ✖ Good : ●●● Fair : ●● Poor : ● |
| GENERAL CONDITION |
| Machine Starts and is Operable | ✔ |
| S.O.S. (All Compartments) | ✖ |
| GENERAL APPEARANCE |
| Cleaning Required | ✔ |
| SAFETY ITEMS |
| ROPS Certification Plate | ✔ |
| Safety Decals In Place | ✔ |
| Safety Decals Legible | ✔ |
| OPERATOR STATION |
| Safety Decals Legible | Full |
| ENGINE |
| Apparent Other Engine Damage | ✖ |
| Blow By | ✖ |
| Fuel Leaks | ✖ |
| Knocking | ✖ |
| Oil Leaks | ✖ |
| Water in Oil | ✖ |
| COOLING SYSTEM |
| Compression in Radiator | ✖ |
| ELECTRICAL, STARTING AND CHARGING SYSTEM |
| Alternator | ●●● |
| Batteries / Cables | ●●● |
| Starter | ●●● |
| Wiring | ●●● |
| TRANSMISSION |
| Leaks - TRANSMISSION | ✖ |
| Transmission - Noisy | ✖ |
| STEERING |
| Steering Linkage | ●●● |
| Steering Operating Condition | ●●● |
| HYDRAULICS |
| Leaks - HYDRAULICS | ✖ |
| BLADE |
| Cutting Edge & Bits | ●●● |
| Face / Moldboard | ●●● |
| Knuckle | ●●● |
| Pins | ●●● |
| Push Arm | ●●● |
| Single Tree | ●●● |
| Spill Rack | ●●● |
| Tilt Arms | ●●● |
| Tower | ●●● |
| Trunnions | ●●● |
| RIPPER / GRAPPLE / WINCH |
| Beam / Frame | ●●● |
| Brackets / Studs | ●●● |
| Lines / Fittings - RIPPER / GRAPPLE / WINCH | ●●● |
| Pins & Bushings | ●●● |
| Ripper Lift Cylinder | ●●● |
| Shanks / Get | ●●● |
| UNDERCARRIAGE |
| Pins & Bushings Turned? | ✖ |
| FINAL DRIVES |
| Housings, Left | ●●● |
| Housings, Right | ●●● |
| Planetaries / Differential, Left | ●●● |
| Planetaries / Differential, Right | ●●● |
| COMMENTS, MISC. REPAIRS, GENERAL REMARKS |
| Pins & Bushings Turned? | Machine started well cold, and appeared to operate well during warm up. Right cab door was stuck in open position. Throttle switch would only lower idle with park brake off, when park brake engaged, throttle would increase. |
| Pins & Bushings Turned? | Front grab handles dented/missing. Ripper. Undercarriage approx. 60% remaining overall. |